AViPAS 3G-SDI/HDMI/USB PTZ Camera with PoE and 20x Zoom (White)

AViPAS AV-2020 Overview

The low-noise 1/2.8" CMOS sensor ensures a high signal-to-noise ratio while advanced 2D/3D noise-reduction technology further reduces image noise so that an even sharper image is delivered in low light. The RJ45 Ethernet port allows you to control and configure the camera via IP, and it also allows simultaneous dual streaming via IP for a live Internet stream. You can also output the video via USB Type-B, and with UVC and UAC support, making it easy to interface with a computer to send video and audio to a streaming or recording application. There is also a 3.5mm audio line input on the back to input stereo audio into your streams and video output.

The pan/tilt/zoom mechanism uses quiet, smooth movements, controllable using the included IR remote controller, ONVIF and Visca-over-IP control, or by using the RS-232 input/outputs that support VISCA, Pelco-D, and Pelco-P protocols for use with a separately available controller. You can store up to 128 presets using an optional serial controller, or store 10 presets when using the included IR remote. You can power the camera using a networked PoE+ (Power-over-Ethernet) switch, or by using the included power adapter. The camera also includes an RS-232 control cable and a USB cable.

Key Features

• Up to 1080p60 output over HDMI and 3G-SDI outputs
• Up to 1080p30 IP streaming; simultaneous dual-stream support
• Up to 720p USB 2.0 video output via USB 2.0 Type-B output
• 20x optical zoom
• ±170° panning, ±90° tilting
• Fast, accurate, and stable autofocus technology; manual focus also supported
• Low-noise 2.1MP CMOS sensor ensures high signal-to-noise ratio
• 2D/3D noise reduction technology further reduces noise while ensuring image sharpness
• Quiet PTZ mechanism
• H.265/H.264 compression
• 3.5mm line stereo audio input with support for AAC and LPCM encoding
• ONVIF and Visca-over-IP control and RTMP/RTSP streaming protocol support with easy linking to common streaming media servers
• VISCA, Pelco-D, and Pelco-P communication protocols via RS-232 serial interfaces
• PoE+ (Power-over-Ethernet) IEEE 802.3at support
• Low-power sleep function
• 128 serial presets, 10 via IR remote
• Wide dynamic range
• White Balance: auto, manual, one push

MS