The low-profile Magewell AIO 4K is compatible with Windows, macOS, and Linux systems. Extraction of audio-formation and channel-status data, video-timing, Sony and Canon DSLR timecode, and 3D-format information is supported, as are multiple color spaces in 8- and 10-bit formats. Video processing features include frame-rate conversion, cropping, scaling, de-interlacing, and aspect-ration conversion. Multiple Magewell cards can be used and numbered in one system.
HDMI-Specific Features
- 297 MHz HDMI receiver
- Adaptive HDMI equalizer
- Customized EDID support
- Extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
- Full colorimetry support
- Support for 8-bit signals using RGB/YUV 4:4:4 color sampling at pixel rates no greater than 297 MHz
- Support for 12-bit signals using YUV 4:2:2 color sampling at pixel rates no greater than 297 MHz
- Support for 10/12-bit signals using RGB/YUV 4:4:4 color sampling at pixel rates no greater than 170 MHz
- Extraction of audio formation information, and channel status data supported
- Extraction of video timing information supported
- Extraction of 3D format information supported
- Extraction of Sony/Canon DSLR time code supported
- Side-by-Side Half, Top-and-Bottom, and Frame Packing 3D mode supported
SDI-Specific Features
- Integrated cable equalizer supporting cable lengths up to 755' for HD signals
- Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards
- Support for 2K (2048 × 1080) & 4K (4096 × 2160) mode
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for 10/12-bit color depth
- Support for extraction of SMPTE 352 payload identifier
- Support for up to 8 (mono) audio channels at 48 KHz (channels 1-8 from the 16 available in the SDI spec)
- Support for extraction of audio formation information & channel status data
- Limited support of 3Gb-DS: only the first stream can be captured
- Limited support for capture of the first link of dual link interfaces:
- YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
- YCbCr 4:4:4 10-bit: captured as 4:2:2
- RGB 4:4:4: R/B sub-sampled
Video Capture Formats
- Image-capture resolutions up to 4096 × 2160 pixels
- Capture frame rates up to 144 fps (Actual capture frame rate can be limited by PCIe bandwidth and image resolution)
- 4:2:0 8-bit capture formats: NV12, I420, YV12
- 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
- 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
- 4:4:4 10-bit capture formats: V410, Y410
- Additional capture formats are supported via Pro Capture SDK for DirectKS
Video Processing Features
- Two video processing pipelines with ~360 MP/s processing bandwidth for each one
- Full 10-bit video processing
- Video cropping and scaling
- Video de-interlacing:
- Weave
- Blend top & bottom field
- Top field only
- Bottom field only
- Video aspect ratio conversion:
- Auto or manual selection of input aspect ratio
- Auto or manual selection of capture aspect ratio
- Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding
- (Letterbox or Pillarbox)
- Video color format conversion:
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of capture color format, quantization range & saturation range
- Supports RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
- Supports Limited or Full quantization range
- Supports Limited, Full & 'Extended gamut' saturation range
- Video frame rate conversion
- Video OSD composition:
- Supports PNG OSD image (up to 4096 × 2160)
- Supports dynamic loading of RGBA OSD images via SDK
-S