$3099.99$3089.99
Sold By: InVastor
The Sub10 MK2 is a powerful subwoofer designed to extend the low-frequency capabilities of any near or midfield monitoring system down to 25Hz. A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods. An additional output allows you to cascade as many subwoofers as needed. The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).
Condition: New
Ships From: Brockton, Massachusetts, United States
Delivery Options: Local Pickup- Economy Shipping
Knox Gear 25Ft XLR Cable Male to XLR Female Microphone Cable (x2)
Knox Gear 25FT XLR Male - XLR Female Microphone Cable, is professionally designed to prevent external interference and ensure signals travel rapidly and smoothly with minimum distortion, delay, or loss. These cables feature two 20-gauge CCAM conductors, which are twisted pair with cotton yarn fillers, conductive PVC shield with 100% coverage, and CCAM spiral shielding with 90% coverage.
ADAM Audio A7V Powered Two-Way Studio Monitor (x2)
ADAM Audio HPS (high-frequency propagation system) waveguide technology enables tweeters to disperse sound with controlled consistency, broad on the horizontal axis but tightly focused in the vertical plane. The A-Series introduces a rotatable HPS waveguide design. You can shift A Series tweeters in 90-degree steps to continue to benefit from HPS waveguide technology whether you position the speakers horizontally or vertically. The A-Series HPS Waveguide is made from a new glass fiber polymer compound that helps create a clear sound, free of unwanted resonance. The ADAM Audio X-ART tweeter is at the heart of the rotatable HPS waveguide. Handmade in Germany, the X-ART tweeter provides precise transient responses and reproduces the finest sonic details. This X-ART tweeter is used in every A Series speaker, providing a detailed, consistent sound across the product line.
A Series of woofers are constructed with a unique blend of mineral stone fibers that have been baked together to create a lightweight but highly stable material. The mineral composition, layering, and geometry of each cone are specific to the driver used in each model. By combining this material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean low-end.
The A-Series combines the best of both digital and analog worlds. The woofers are driven by Class D amplifiers that help produce linear performance while reducing distortion. These amplifiers were chosen specifically for their power and efficiency, in terms of both energy consumption and sound reproduction. Low thermal dissipation allows for a smaller heat sink, which facilitated additional investment in the exceptional power and performance of the A-Series.
The A-Series capitalizes on the transformative power of DSP-based electronics to provide greater tuning precision and better predictability than analog-only speakers. With firmware that can be updated through an Ethernet connection, over time you can expect to integrate the latest DSP-based capabilities from ADAM Audio—including new filter types and features, plus alternative voicings.
On the back panel of A-Series speakers, you will find four bands of room adaptation equalization: Bass, Desk, Presence, and Treble. Each band is adjustable in predefined steps, offering more than 100 tuning options to help compensate for the typical acoustic problems that arise from speaker placement.
A “Voicing” is a pre-defined sound profile of the A-Series monitors. On the back panel, you will find two different selections, “UNR” and “Pure”. Here you will also find the “Ext” option which is dedicated to the extended functionality that comes with A Control via the Ethernet connection.
The DSP-based functionality of all A-Series monitors can be controlled remotely and in real-time over Ethernet using the free-to-download A Control software. A Control is available to download for Windows and macOS in the MyADAM area of www.adam-audio.com for customers who have registered their A-Series monitors.
A Series speakers are designed to be adaptable to changing requirements, preferences, and environments. Using the A Control software, you can push advanced filters directly to an embedded platform onboard the monitors to help compensate for imperfect room acoustics. This embedded platform supports filters from industry-leading third-party Sonarworks. Using Sonarworks software and a measurement mic, you can calibrate your speakers for a new room or shifting taste.
Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet) (x2)
The Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Balanced Cable gives you a male on one end, and a male XLR on the other. The Pig Hog Solutions line features an expanding selection of adapters and cables designed to solve common interfacing problems in the studio and on stage. The cable is manufactured to our high-quality standards to insure transparent reproduction of the source audio without any coloration or distortion. Pig Hog is designed by musicians, for musicians.
What's in the Box
ADAM Audio A7V Powered Two-Way Studio Monitor (Pair)
Adam Audio Sub10 10-Inch Mk2 Powered Studio Subwoofer
Knox Gear 25-Feet XLR Male to XLR Female Microphone Cable (2)
Pig Hog PX-TMXM2 1/4-Inch TRS to XLR Male to Male Balanced Cable (10-Feet)
AQ/
$1799.99$1809.99
$1799.99$1809.99
$2255.99$2265.99
$2255.99$2265.99
$2399.99$2409.99
$2399.99$2409.99
$799.00$809.00
$799.00$809.00